Ballistic Chronograph app for the Caldwell line of Ballistic Chronographs.
advertisement
| İsim | Caldwell Ballistic Chronograph |
|---|---|
| Sürüm | 1.50 |
| Güncelleme | 22 Eyl 2024 |
| Boyut | 2 MB |
| Kategori | Spor |
| Yükleme sayısı | 100B+ |
| Geliştirici | Battenfeld Technologies |
| Android OS | Android 2.1+ |
| Google Play ID | com.battenfeld.chrono |
Caldwell Ballistic Chronograph · Ekran Görüntüleri
Caldwell Ballistic Chronograph · Açıklama
The Ballistic Chronograph app is for use with the Caldwell line of Ballistic Chronographs supporting a 3.5mm (TRRS) line-out serial port.
For best performance - make sure your device is up to date with the latest software updates provided by your manufacturer and/or carrier.
If you are unable to connect your Android device to the chronometer follow these instructions:
With the audio cable disconnected at both ends…
1. Connect the audio cable to the Android device
2. Connect the audio cable to the Chronometer
Chrono USB Support (v. 1.24+)
NOTE: Not all devices support USB. To test if your device has USB support - download and run USB Host Diagnostics by Chainfire from Google Play.
A USB 2.0 A-Male to B-Male Cable + a USB On-The-Go Connector is required. These cables can be purchased through Amazon.com, Radio Shack, and other retailers.
When prompted to Allow the app Chronograph to access the USB device - Select OK.
If you do not see a prompt - check your connection and try again.
If you are unable to connect the device - Please ensure your device has USB support.
For best performance - make sure your device is up to date with the latest software updates provided by your manufacturer and/or carrier.
If you are unable to connect your Android device to the chronometer follow these instructions:
With the audio cable disconnected at both ends…
1. Connect the audio cable to the Android device
2. Connect the audio cable to the Chronometer
Chrono USB Support (v. 1.24+)
NOTE: Not all devices support USB. To test if your device has USB support - download and run USB Host Diagnostics by Chainfire from Google Play.
A USB 2.0 A-Male to B-Male Cable + a USB On-The-Go Connector is required. These cables can be purchased through Amazon.com, Radio Shack, and other retailers.
When prompted to Allow the app Chronograph to access the USB device - Select OK.
If you do not see a prompt - check your connection and try again.
If you are unable to connect the device - Please ensure your device has USB support.
