Kalkulator Ciesielski

Calculator for Carpenters

You will calculate the angle - slope - length of the slope - height - base

Now you can do it without knowing trigonometry,
no complicated patterns.
Install the CARPENTER CALCULATOR.
and see how simple it is.

The KT-2 calculator is an easy-to-use tool that will calculate the height, base, slope length, slope and angle needed to cut out the bottom of the roof for you.


P=base
W=height
DS. = slope length (rafter length) green
Diagon = diagonal
LN=length of the corner (basket), orange

-after clicking in the gray field, you can enter the data you know
-holding the gray field will delete the data
-quick click on the gray field to activate the cell phone
-C is used to remove the last character or number entered, allowing you to quickly correct errors without having to delete the whole thing
calculations


1.The first line of the calculator is used to determine the angle of slope/slope between the base and the slope. Enter the height and base and you will get the slope length, slope in percent and degrees.

We enter the data into the calculator; (we work on the decimal mm/cm numerical system)

Height 100 cm and Base 400 cm and you will receive;
DS.=412.31 cm / slope 25% / slope 14.04 degrees

2. After calculating the slope of 14.04 degrees, we enter the angle of inclination of our slope.

Enter an angle of 14.04 degrees
Enter Base 488cm (width of the slope profile at the base)

By entering the slope angle and the base, you get...
Corner rafter angle - LN angle 10.01 degrees
Height 121.76 cm
Drop Length 502.96 cm (total length of the rafter ridge)
Diagonal 690.14 cm (base of corner or valley rafter)
LN-Corner length 700.8 cm (corner/basket length at the spine)

3.Enter the distance of the wall, purlin and ridge from the eaves.
88 cm
320 cm
480 cm
488 cm
and in DS. you will get the jamming points for the base rafter and the LN corner rafter

If you have any questions, you can call 📞...

Dopierała Daniel 606-887-841
Jatczak Paweł 501-611-825